Kitchen Rewires, in Bexley, Dartford & Sidcup
Trusted by 1,000s of customers across Kent and South East London.
Kitchen electrics that keep up
The kitchen asks more of your electrics than any other room. Ovens, hobs, dishwashers and a worktop full of appliances can all be drawing power at the same time, and wiring that was fine years ago often cannot keep up. The result is circuits that keep cutting out, and never quite enough sockets where you need them.
Whether you are upgrading the kitchen you have or fitting a new one, we take care of all the electrical work across Bexley, Dartford, Sidcup and the surrounding areas. We work out exactly which appliances need their own supply and where your sockets and lights should go, and we are happy to work alongside your kitchen fitter so everything comes together on schedule.
What we can do
From a single socket swap to lighting a whole room, here is what we can help with.
- Add dedicated circuits for heavy appliances such as ovens, hobs and washing machines
- Connect your cooker, oven and hob
- Add extra sockets above the worktops, positioned where you actually use them
- Fit under-cabinet and plinth lighting
- Wire in extractors and ventilation
- Upgrade the circuit protection for added safety
- Move sockets, switches and lights when the layout changes
- Test and certify the work once it is complete
Commercial & Business work
We wire commercial and shared kitchens as well as home kitchens. These spaces work hard, so the circuits need to be designed around the equipment in use and the hours it runs for.
Office and staff kitchens
Pubs and bars
Cafes and restaurants
Rental properties and HMOs
Landlords and letting agents
We can install the heavier-duty supplies that commercial appliances need, schedule the work around your opening hours, and certify everything for your safety records and insurance.
Why choose Priority Electrical & Renewables
The electrics are the part of a kitchen you do not see, but they are the part that has to be right. Here is why we are a safe pair of hands for the job.
We fit around your fitter.
We work to your kitchen fitter’s schedule, wiring everything before the units go in and returning to connect it once they are in place.
Built for the demands.
We design the circuits around your appliances, so there is plenty of power and no more cutting out.
Qualified and certified.
We are NICEIC registered, and the finished work is fully tested and certified.
Neat and guaranteed.
We work tidily around a room in progress, and back our labour with a workmanship guarantee.
How it works
Swapping a fuse board is simpler than most people expect. Here is how it works from first contact to final certificate.
Fill out our enquiry form or call 0203 507 1145, and tell us what you have in mind for the kitchen.
Together with you and your fitter, we work out the sockets, lighting and appliance circuits you need.
Before any units go in, we run all the new cabling ready for the work that follows.
Once everything is in place, we connect it all, finish off, test the work and hand over your certification.
What affects the cost
- The number of appliances and dedicated circuits needed
- Whether the layout is changing, which means new positions for sockets and lighting
- The lighting you choose, such as under-cabinet lights or recessed ceiling spotlights
- Coordinating the timing with your kitchen fitter and any other trades
Upgrading your kitchen?
Click Book Now and fill in our quick enquiry form for a free, no-obligation quote. You can also call us on 0203 507 1145 or send an email to info@priorityelectric.co.uk
FAQs
Why do my kitchen sockets keep cutting out?
Usually it means the circuit is being asked to do more than it was designed for, so the fuse board cuts the power to protect it. Adding dedicated circuits for your heavier appliances normally solves it. We can take a look and advise.
Can you work alongside my kitchen fitter?
Yes, we do this all the time. We wire everything before the units go in, then return to connect and finish once they are in place, working to your fitter’s schedule.
Do I need a dedicated cooker circuit?
Electric cookers and many ovens and hobs need their own circuit so they have enough power to run safely. We will check your appliances and supply everything correctly.
Can you add under-cabinet lighting?
Yes, it is one of the most popular additions. We can fit LED strip or spotlights on a convenient switch to light up your worktops.
Where we work
Based in Bexleyheath, we proudly cover Bexley, Dartford, Sidcup, and surrounding areas. Our local knowledge allows us to respond quickly and provide dependable electrical services across South East London and nearby Kent locations.
- Abbey Wood
- Belvedere
- Bexleyheath
- Blackfen
- Bromley
- Charlton
- Chislehurst
- Crayford
- Dartford
- Eltham
- Gravesend
- Greenhithe
- Grove Park
- Hextable
- Meopham
- Orpington
- Sevenoaks
- Sidcup
- Swanley
- Swanscombe
- Welling
- Willmington
- Wrotham
- Woolwich
